It is totally different to utilize a stand-up forklift compared to a sit-down unit. The way you transport and pick up loads along with your movements are totally different. If you do not have proper training for utilizing a stand-up model, you can probably cause harm co-workers or to yourself. When operating a stand-up unit, you must follow the proper safety rules. There are several basic operating standards that need to be met when using a stand-up model.
To start on a stand-up unit lift truck, it is essential to get a good feel for the controls and the steering knob. Instead of a steering wheel, the steering is handled using the knob steering plate. Take note that this knob moves exceptionally fast, therefore, you must get used to moving it gently in order to be sure not to over steer. The horn is situated on the control handle, as is the control for forwards, backwards and the movement of the forks. The floor pedal allows the machine to move.
When you are ready to start, turn the key to start the machine. Be sure that your forks are not extended. If you are moving around the floor, the forks should be pointed slightly upwards. Never drive with the forks in their extended position. If you are traveling forwards, move the control handle forward and step on the pedal to make the lift move forward. If you are backing up, be certain to beep your horn so as to warn people around you. Look behind you prior to stepping on the pedal so as to make sure the path is clear and safe. Then, while stepping on the pedal, pull the control handle towards you. Stay alert and focused and make sure that you are always operating in a safe manner.
When approaching a corner with the lift truck, turn the steering knob in the direction you are heading. Make sure to keep your foot on the accelerator and keep your hands on the control handle. When turning right, the steering knob would move in a clockwise direction while moving forward. If you are turning left, your steering knob will go in a counter-clockwise direction.
The stand-up models take some getting used to, particularly if you have only utilized sit down units. With some training and taking some time to figure out the machinery, you could quickly and efficiently handle loads in little time.